Fixed Systems
CO₂ high/low pressure, Novec 1230, dry powder, water mist / Hi-Fog, sprinkler, foam, galley CO₂ and deep fat fryer — inspection, testing, refill.
Safety Services › Fire Fighting Equipment & Systems
Fire Fighting Equipment & Systems — Marine Service
Reliable detection and rapid suppression save lives and cargo. Woell Marine provides class-approved inspection, testing, refill and repair of fixed and portable fire fighting systems on board — in full compliance with SOLAS Chapter II-2, the FSS Code and flag state requirements.
From portable extinguishers to fixed CO₂, Novec 1230, water mist and foam systems, we deliver a single-source service with certified documentation accepted by all major class societies.
Detection & Gas Systems
Fire, smoke and flame detection loops plus fixed gas-detection systems — calibration, sensitivity checks and certification.
Portable & Life Safety
Portable/wheeled extinguishers, SCBA & EEBD service, mobile foam applicators and EN 12021 breathing air quality testing.
服务范围
Complete scope of fire safety service delivered on board or in workshop — annual, bi-annual, 5-yearly and 10-yearly:
- Annual, bi-annual, 5-yearly and 10-yearly inspection of fixed CO₂, Novec 1230, water mist, fixed foam, dry powder, sprinkler, galley CO₂ and deep fat fryer systems
- Liquid level check and hydrostatic pressure test and refill of CO₂ cylinders
- Foam concentrate sampling and analysis per IMO MSC.1/Circ.1312
- PFOS / PFAS testing of foam concentrates through partner laboratory
- Water mist / Hi-Fog and sprinkler system function and pressure tests
- Fire, smoke and flame detector sensitivity check and replacement
- SCBA / EEBD service and EN 12021 breathing air quality analysis
- Inspection, refill and hydrostatic pressure test of portable and wheeled fire extinguishers
One Partner — One Standard
From detection loop to final cylinder recharge: Woell Marine covers every fire safety discipline with certified technicians, calibrated tools and unified reporting worldwide.
Systems & Equipment We Service
Fixed Systems, Portable Equipment & Detection
Fixed Fire-Extinguishing Systems
CO₂ High & Low-Pressure Systems
Independent inspection and maintenance of fixed CO₂ fire-extinguishing systems. Our service includes hydrostatic pressure testing of cylinders, level checks via ultrasonic liquid level indicators, and functional testing of release valves and manifolds in accordance with IMO MSC.1/Circ.1318.
Novec 1230 Systems
Specialized maintenance for clean-agent systems. We verify agent quantity, cylinder pressure, and signal transmission to the fire alarm panel, ensuring the system is ready for immediate deployment in sensitive areas.
Fixed Dry Powder Systems
Specialized inspection of dry chemical powder systems, primarily used on liquefied gas carriers. We verify the fluidity of the powder agent, inspect the nitrogen propellant cylinders, and test the discharge monitors and hose stations to ensure immediate activation. Dry powder agitation is a mandatory part of every inspection we conduct.
Galley CO2 & Deep Fat Fryer / Wet Chemical Systems
Targeted inspection of fixed galley fire-extinguishing systems — galley-specific CO₂ units, deep fat fryer and wet chemical suppression systems. We ensure that discharge nozzles in exhaust ducts and deep fat fryer hoods are clear and that the mechanical or electrical activation triggers are fully operational. For galley CO₂, deep fat fryer and wet chemical systems, we always check when the last hydrostatic pressure test and refill were performed.
Water-Based & Mist Systems
Water Mist & Hi-Fog Systems
Technical service for high-pressure water mist units. We focus on pump performance tests, cleaning of fine-mesh filters, and the functional testing of section valves to guarantee immediate activation and optimal atomization.
Sprinkler Systems
Periodic inspection of sprinkler networks. Our service covers flow tests of alarm valves, checking of pressure switches, and visual inspections of piping to identify corrosion or blockages before they become a risk.
Foam Systems & Laboratory Services
Foam Systems & Foam Monitors
Maintenance of foam proportioning equipment and monitors. We verify the correct mixing ratio of foam concentrates and ensure that monitors and valves are lubricated, maneuverable, and ready for deployment.
Foam Sampling & Laboratory Analysis
Professional on-board sampling of foam concentrates. In accordance with IMO MSC.1/Circ.1312, we provide independent laboratory analysis to certify expansion properties and drainage time.
PFOS / PFAS Testing
Reliable lab data to ensure regulatory compliance for onboard foam concentrates — specialized PFOS/PFAS-free testing through our partner laboratory to meet the latest environmental regulations.
Detection, Gas & Safety Services
Fire & Smoke Detection Systems
Certification and testing of fire detection loops. We use professional test equipment to verify the sensitivity of smoke, heat and flame detectors, ensuring reliable alerts without false alarms on the Bridge or ECR.
Fixed Gas-Detection Systems
Calibration and functional testing of gas monitoring systems. We use certified calibration gases to verify sensor accuracy for flammable gases, toxic vapors, or oxygen depletion in pump rooms and hazardous areas.
Portable Equipment & Life Safety
Portable & Wheeled Fire Extinguishers
Inspection, refill and hydrostatic pressure test of portable and wheeled fire extinguishers (Powder, CO₂, Foam, Water). We ensure correct charge levels and verify compliance with SOLAS and flag state requirements.
Mobile Foam Applicators
Technical check of portable foam applicators and their associated concentrate tanks. We verify that the units are ready for immediate use in engine rooms or on deck, ensuring the mixing nozzles are clear and hoses are in prime condition.
SCBAs (Self-Contained Breathing Apparatus)
Comprehensive service for breathing apparatus, including face mask leak tests, functional checks of demand valves, and hydrostatic pressure testing of air cylinders to guarantee firefighter safety.
EEBDs (Emergency Escape Breathing Devices)
Periodic inspection of emergency escape sets. We verify pressure gauges, hood integrity and expiration dates to ensure that crew members have a reliable air supply during emergency evacuations.
Breathing Air Compressor Air Quality Testing
Certification of breathing air purity. Using calibrated testing equipment, we analyze the air delivered by your high-pressure compressors and test for CO, CO₂, oil and water vapor to ensure full compliance with EN 12021.
FAQ