Menu
Showing 1–16 of 260 results
2 meter filling hose for cylinders refill.
Item No. 2 meter filling hoseADD TO LIST1.5 meter filling hose for cylinders refill.
Item No. 1.5 meter filling hoseADD TO LIST
3 meter filling hose for cylinders refill.
Item No. 3 meter filling hoseADD TO LIST
3 meter remote suction kit. To be used only for the compressors of the Portables and Tankless line with gasoline engine.
Item No. 3 meter remote suction kitADD TO LIST
Available only for compressors with electric motor. The automatic condensate drain removes water from the intermediate separator and final separator automatically during operation (every 7 minutes).
Item No. Automatic condensate drainADD TO LIST
The compressor switches off automatically when it reaches final pressure. Consisting of a 232 bar pressure switch with 250 bar safety valve.
Item No. Autostop for portable compressors – 232 barADD TO LISTThe compressor switches off automatically when it reaches final pressure. Consisting of a 300 bar pressure switch with 330 bar safety valve.
Item No. Autostop for portable compressors – 300 barADD TO LIST
The Coltri Breathing Air Compressor Icon LSE 100 is ideally suited as a protector compressor. It can fill both LG/LP compressed air cartridges and exchange cylinders/industrial bottles. The compressor provides breathing air quality thanks to its air filtration system, as long as the filter cartridge is changed regularly. Its relatively lightweight design makes the Coltri… Continue reading COLTRI
Breathing Air Compressor Icon LSE 100
Final filter monitoring system, oil change and technical interface.
Item No. C-monitorADD TO LIST
Filling connection DRV DIN 232 bar.
Item No. Filling connection DRV 232 barADD TO LIST
Filling connection DRV DIN 300 bar.
Item No. Filling connection DRV DIN 300 barADD TO LIST
Filling connection DRV INT/YOKE 232 bar.
Item No. Fillint connection DRV INT/YOKE 232 barADD TO LIST
Pressure maintenance valve for portable compressors. Use only with BC cylinder connections.
Item No. Pressure maintenance valve for portable compressorsADD TO LIST
150 L. water + additive wheeled fire extinguisher, pressurized at moment of use, temperature range from +5°C to +60°C, manufactured in accordance to EN 1866-1, approved Marine Equipment Directive MED 2014/90/EU, certified according to the directive for pressure equipment PED 2014/68/EU.
TECHNICAL SPECIFICATIONS:
– FIRE RATING: A IV B
- EXTINGUISHING AGENT: Water + additive (98 % Water + 2 % SC-6)
– PROPELLANT: Nitrogen 110 bar
– TEMPERATURE RANGE: -+5°C / +60°C
- NOMINAL CHARGE: 150 L
– FULL WEIGHT: ~ 220 kg
– DIMENSIONS: Height 1350 mm – Width 750 mm – Depth 640 mm
– DISCHARGE TIME: 139 sec.
- CAP TIGHTENING TORQUE: Minimum 60 Nm, Maximum 70 Nm
– CYLINDER PRESSURE TEST: PT 30 bar
– CYLINDER VOLUME: 170 L
- SAFETY DEVICE: Set between 21 and 26 bar
– CYLINDER MATERIAL: Stainless steel AISI 304
– EXTERNAL/INTERNAL TREATMENT: Sandblast and epoxypolyestere powder painting, Red Ral 3000 colour
2 Kg powder extinguisher, temperature range from -30°C to +60°C, manufactured in compliance with UNI EN 3-7, (D.M. 7.1.2005), approved according to the Marine Equipment Directive MED 2014/90/EU, certified according to the Pressure Equipment Directive PED 2014/68/EU. Manufactured according to production controls in accordance with EN 3-10.
Technical specifications :
– FIRE CLASSIFICATION 13 A 89 B C
– EXTINGUISHING AGENT ABC Powder – MAP 20% – EPW 18462 (ABC Favorit Tertia – Rühl)
– PROPELLANT Dehumidified air or nitrogen (N2), 15 bar at 20°C
– TEMPERATURE RANGE -30°C / +60°C
– NOMINAL LOAD 2 Kg
– FULL WEIGHT ~ 3.7 Kg
– DIMENSIONS Height (base – valve) 380 +/- 5 mm – Diameter (cylinder) 110 +/- 2 mm
– Discharge time ~ 13.3 seconds
– VALVE TORQUE Minimum 45 Nm, Maximum 68 Nm
– CYLINDER PRESSURE TEST PT 27 bar
– CYLINDER CAPACITY 2.5 LITRES.
– SAFETY VALVE Adjusted between 20 and 26 bar
– CYLINDER MATERIAL Alloy steel
– EXTERNAL/INTERNAL TREATMENT Sandblasting and epoxy polyester powder painting, colour red Ral 3000.
5Kg CO2 fire extinguisher, temperature range from -30°C to +60°C, manufactured according to EN 3-7, certified according to the Pressure Equipment Directive PED 2014/68/EU. Product quality certification guaranteed by Bureau Veritas Italia. Suitable for use in case of fire with electric voltage up to 1000 V at a distance of 1 mt.
Technical specification
– FIRE RATING: 89 B
– EXTINGUISHING AGENT: Co2 99.99%.
– TEMPERATURE RANGE: -30°C +60°C
– NOMINAL CHARGE: 5 Kg
– FULL WEIGHT: ~ 12 Kg
– DIMENSIONS: Height 670 mm Diameter 152 mm
– Discharge time: 12.5 sec.
– VALVE TORQUE: Minimum 95 Nm, Maximum 130 Nm
– CYLINDER PRESSURE TEST PT: 212 bar
– CYLINDER VOLUME: 7.5 LITRES.
– SAFETY VALVE: Set 185 +15/-23 bar
– CYLINDER MATERIAL: Aluminium alloy AA6061
– EXTERNAL/INTERNAL TREATMENT: Polished